×
×
 
BNC 12G SDI | Jack - Bulkhead | Crimp
Product Overview
Part Number
BN02-0179-C06-Z
Series
Description
BNC 12G SDI Crimp Bulkhead Jack, Hex. Flange, Belden RG179DT, RG179B/U
Primary Fixing
Specifications
Electrical
Dielectric Withstanding
1500 Volts RMS Maximum
Impedance
75 ohms
Interface Frequency
12 GHz
Working Voltage
500 Volts RMS Maximum
Environmental
RoHS Compliant
Yes
Temperature Range
-55 to +85 degrees C
Material
Body
Brass, Nickel Plated
Contact
Brass, Gold Plated
Dielectric
Delrin
Ferrule
Brass, Nickel Plated
Gasket
Rubber
Insulator
PTFE
Locknut
Brass, Nickel Plated
Tube
Brass, Nickel Plated
Washer
SS41, Nickel Plated
Mechanical
Cable Retention
Equal to breaking strain of cable
Durability
500 mating cycles
Fixing Method
Crimp
Cable Preparation
A = 0.260in
B = 0.181in
C = 0.189in
S1_R
Tooling
Crimp Die Sizes
0.067in hex.
0.178in hex.
Documents
Order
Taiwan stock 0
Pending 0
Minimum order quantity 1
Pricing
1 off $10.48 each
10 off $9.18 each
50 off $7.87 each
100 off $5.51 each
300 off $5.39 each
This product is no longer stocked.

For alternatives please see the part numbers listed below.
Order
Taiwan stock 0
Pending 0
Minimum order quantity 1
Pricing
1 off $10.48 each
10 off $9.18 each
50 off $7.87 each
100 off $5.51 each
300 off $5.39 each
This product is no longer stocked.

For alternatives please see the part numbers listed below.
Product Overview
Part Number
BN02-0179-C06-Z
Series
Description
BNC 12G SDI Crimp Bulkhead Jack, Hex. Flange, Belden RG179DT, RG179B/U
Primary Fixing
Specifications
Electrical
Dielectric Withstanding
1500 Volts RMS Maximum
Impedance
75 ohms
Interface Frequency
12 GHz
Working Voltage
500 Volts RMS Maximum
Environmental
RoHS Compliant
Yes
Temperature Range
-55 to +85 degrees C
Material
Body
Brass, Nickel Plated
Contact
Brass, Gold Plated
Dielectric
Delrin
Ferrule
Brass, Nickel Plated
Gasket
Rubber
Insulator
PTFE
Locknut
Brass, Nickel Plated
Tube
Brass, Nickel Plated
Washer
SS41, Nickel Plated
Mechanical
Cable Retention
Equal to breaking strain of cable
Durability
500 mating cycles
Fixing Method
Crimp
Cable Preparation
A = 0.260in
B = 0.181in
C = 0.189in
S1_R
Tooling
Crimp Die Sizes
0.067in hex.
0.178in hex.
Documents